
PS Engineering
PMA7000B Series Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-780-0005 Page 1-3 Rev. 11, February 2015
Audio Selector Specifications
Audio selector panel input impedance:
Speaker Output (into 4 ) with no clipping
14 VDC:
28 VDC:
3 Watts (min.)
10 Watts (min.)
9 (Com 1, Com 2, Com 3, Nav 1, Nav 2, ADF,
DME, MKR, AUX)
5 (Com 1, Com 2, Com 3
Com1/2, Com1/3)
38 mW each headset, no clipping <1% THD
6 places (with individual IntelliVox® circuits)
>-30 dB "Soft Mute" when Com or intercom active.
<1% THD @ 38 mW into 150
Mic Freq. Response, 3 dB:
Music Freq. Response, 3 dB:
MARKER BEACON RECEIVER: (if equipped)
75 MHz Crystal Controlled
Capable of: (preset at factory for field application)
1000 Volts (Hard) (360 to 570 V soft)
200 Volts (Hard) (130 to 200 V soft)
-6 dB at ±10 kHz
-40 dB at ±120 kHz
7.5 (±4 VDC unloaded, at maximum brightness) VDC
positive when active, max. current 125 mA
Active high (4.5 ± 1.0VDC)
1.6 EQUIPMENT SUPPLIED
1 ea. of the following units:
PMA7000B Audio Panel with Marker Beacon and Stereo inter-
com.
PMA7000B Audio Panel without Marker receiver
PMA7000B Installation Kit:
PMA7000B w/MKR
250-007-0002
PMA7000B No
Marker 250-007-
PMA7000 installation rack assembly
Top Molex Connector Shell w/key, 44 pin, key 4/5
Bottom Molex Connector Shell w/key, 44 pin, key 7/8
4 40 X 7/16 screw w/nylon patch
6-32 X 3/4 pan head Phillips screw
Kommentare zu diesen Handbüchern