PS Engineering Avidyne PMA8000B Betriebsanleitung Seite 5

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 24
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 4
Page 5
October 2010
202-890-0403
Monitor Function (11)
The MON 1 and Mon 2 buttons allow
the pilot to listen to the standby fre-
quencies selected by the Entegra
ACD215 Control/Display Unit. Note: These audio sources are muted
during transmit to prevent bleed through.
Telephone (TEL) (9)
The TEL mode serves as a full duplex interface
and distribution for telephone systems such as
AirCell or portable cellular phones with ear-
piece jacks. Pressing the TEL button activates
the telephone mode.
This connects the telephone to the users as follows:
In ALL mode, all crew and passengers will be heard on the phone
when they speak. Com and other selected radio audio is also heard in
the headsets. If the pilot or copilot pushes the radio PTT, their mic
will be transferred to the selected Com radio. The telephone party will
not hear ATC communications, and vice versa.
In CREW mode, only the pilot and copilot are connected to the tele-
phone. Passengers will not hear the telephone. The pilot and copilot
will also have transmit capability on the other selected transceiver.
In ISO mode, when the PMA8000B MP3 is in the TEL mode, the
pilot position is in the "Phone Booth." Only the pilot will hear the
telephone, and only he will be heard. He will also have access to Com
1 or 2, and will transmit on that radio using the PTT. All selected au-
dio is provided to the pilot.
Cockpit Speaker (6)
The SPR in the lower right section stands for
speaker. This button will place all selected audio
on the cockpit speaker when this switch is se-
Note: As shipped from PS Engineering, the PMA8000B-MP3 does not provide cellular telephone
sidetone (the user’s voice fed back to the headset). Some cell phones do not provide sidetone. In
PMA8000B MP3 Avidyne audio panels above serial number C10251, Telephone sidetone can be
enabled by pressing the Shift (MON 1) and TEL buttons for more than one second.
Because the cell-phone uses an intercom circuit, all stations on that circuit will lose intercom
capability when the cell phone is in use, unless sidetone is present.
Seitenansicht 4
1 2 3 4 5 6 7 8 9 10 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare