PS Engineering PXE7300 Spezifikationen PDF herunterladen (Seite 5)

PS Engineering

PXE7300 Series IFE System

Installation and Operator’s Manual

200-973-0002 Page 1-2 April 2006

1.5 SPECIFICATIONS

FAA-PMA COMPLIANCE

APPLICABLE DOCUMENTS: RTCA/DO-214

RTCA/DO-160D

RTCA/DO-178B (Level E)

RTCA DO-254 (Level E)

ENVIRONMENTAL Qualifications: B1CABSXXXXXXZBBBAUHXXX

Temperature Range:

Operating:

Storage:

-15º C to 55ºC

-40º C to 85ºC

Altitude: Up to 25,000 feet in a non-pressurized area of the cockpit.

DIMENSIONS: Height: 2.0 in. (5.1 cm) Width: 6.25 in. (15.9 cm)

Depth: 7.7 in. (19.8 cm)

WEIGHT (With Rack & Connectors): 2.6 lb. (1.2 kg)

POWER REQUIREMENTS (Including Internal Lighting):

Voltage: 11 to 33 VDC

Maximum Current:

11970

1.5 Amp (Externally protected by a 2 Amp circuit pull-

type breaker.)

Typical operating current:

Lighting Current

800 mA

5 mA

Audio Specifications

Output Impedance:

150 - 1000 Ω

Audio Output: 38 mW each channel, no clipping <1% THD

Distortion: <1% THD

Music Freq. Response, 3 dB: 14 Hz –22 kHz

FCC Type Acceptance

Part 15 Verification to Part 15

Radio Tuning

North America AM: 530 – 1710 kHz, 10 kHz steps

FM: 87.7 – 107.9 MHz, 200 kHz steps

European (Option E) AM: 531 - 1602kHz, 9kHz steps

FM: 87.5 - 107.9MHz, 100kHz steps

1.6 EQUIPMENT SUPPLIED

1 ea. of the following units:

Model Part Number Description

PXE7300 11970 IFE System with AM/FM CD MP3

PXE7300 Installation Kit: 250-973-0001 as shown

Part Number Description Quantity

120-425-4402 44 Pin Connector Key 4/5 1

202-730-00XX Pilots Guide 1

425-001-0002 Gold Plated Crimp Pins 30

430-730-0010 Tray 1

430-730-8025 Tray Shield 1

475-440-0007 4-40x7/16" Phil-Pan w/Nylon Patch 2

475-630-0002 6-32 Clip Nut 6

475-632-0012 6-32” x ½” Fhp Screw 6

510-730-0001 Passive AM/FM Antenna 1

1 2 3 4 5 6 7 8 9 10 ... 26 27

Kommentare zu diesen Handbüchern

Keine Kommentare

PS Engineering PXE7300 Spezifikationen Seite 5

Kommentare zu diesen Handbüchern